Ingxenye 1
I-workpiece overcut:
isizathu:
1) Ukuze ubhampise isisiki, ithuluzi alinamandla ngokwanele futhi lide kakhulu noma lincane kakhulu, okwenza ithuluzi ligxume.
2) Ukusebenza okungalungile ngu-opharetha.
I-3) Isabelo sokusika esingalingani (isibonelo: shiya i-0.5 ohlangothini lwendawo egobile kanye no-0.15 phansi) 4) Imingcele yokusika engalungile (isibonelo: ukubekezelelana kukhulu kakhulu, ukulungiselelwa kwe-SF kuyashesha kakhulu, njll.)
ngcono:
1) Sebenzisa isimiso sokusika: singaba sikhulu kodwa singabi sincane, singaba sifushane kodwa singabi side.
2) Engeza inqubo yokuhlanza ekhoneni, bese uzama ukugcina i-margin ngangokunokwenzeka (imajini ohlangothini nangaphansi kufanele ihambisane).
I-3) Lungisa ngokunengqondo imingcele yokusika futhi uzungeze amakhona ngamamajini amakhulu.
4) Ngokusebenzisa umsebenzi we-SF wethuluzi lomshini, opharetha angakwazi ukulungisa kahle isivinini ukuze afinyelele umphumela wokusika ongcono kakhulu wethuluzi lomshini.
Ingxenye 2
Inkinga yokusetha ithuluzi
isizathu:
1) Umsebenzisi akanembile lapho esebenza mathupha.
2) Ithuluzi liboshwe ngokungalungile.
3) I-blade ku-cutter endizayo ayilungile (i-flying cutter ngokwayo inamaphutha athile).
4) Kukhona iphutha phakathi kwe-R cutter, i-flat cutter kanye ne-flying cutter.
ngcono:
I-1) Imisebenzi eyenziwa ngesandla kufanele ihlolwe ngokucophelela ngokuphindaphindiwe, futhi ithuluzi kufanele lisethwe endaweni efanayo ngangokunokwenzeka.
2) Uma ufaka ithuluzi, lishaye lihlanzeke ngesibhamu somoya noma lisule lihlanzeke nge-rag.
I-3) Lapho i-blade ekusikeni endizayo idinga ukulinganiswa kumphathi wamathuluzi futhi indawo engezansi ipholishiwe, i-blade ingasetshenziswa.
4) Inqubo yokusetha ithuluzi ehlukile ingagwema amaphutha phakathi kwe-R cutter, i-flat cutter kanye ne-flying cutter.
Ingxenye 3
I-Collider-Programming
isizathu:
1) Ukuphakama kokuphepha akwanele noma akusethiwe (umsiki noma i-chuck ishaya ucezu lokusebenza ngesikhathi sokuphakela okusheshayo kwe-G00).
2) Ithuluzi elisohlwini lohlelo kanye nethuluzi lohlelo lwangempela kubhalwe ngokungalungile.
3) Ubude bethuluzi (ubude be-blade) kanye nokujula kwangempela kokucubungula eshidini lohlelo kubhalwe ngokungalungile.
4) Ukujula kokulanda i-axis engu-Z kanye nokulandwa kwangempela kwe-eksisi Z kubhalwe ngokungalungile eshidini lohlelo.
5) Izixhumanisi zisethwe ngokungalungile ngesikhathi sohlelo.
ngcono:
I-1) Kala ngokunembile ubude be-workpiece futhi uqinisekise ukuthi ukuphakama okuphephile kungaphezu kwendawo yokusebenza.
2) Amathuluzi akuhlu lohlelo kufanele ahambisane namathuluzi ohlelo angempela (zama ukusebenzisa uhlu lohlelo oluzenzakalelayo noma usebenzise izithombe ukuze ukhiqize uhlu lohlelo).
3) Linganisa ukujula kwangempela kokucutshungulwa kucwecwe lokusebenza, futhi ubhale ngokucacile ubude nobude bensimbi eshidini lohlelo (ngokuvamile ubude be-clamp bamathuluzi buphakeme ngo-2-3MM kunocezu lokusebenza, kanti ubude beblade buyi-0.5-1.0 MM).
4) Thatha inombolo yangempela ye-axis engu-Z endaweni yokusebenza bese uyibhala ngokucacile eshidini lohlelo. (Lo msebenzi ngokuvamile ubhalwa ngesandla futhi udinga ukuhlolwa ngokuphindaphindiwe).
Ingxenye yesi-4
I-Collider-Operator
isizathu:
1) Iphutha lokusetha ithuluzi le-eksisi ye-Z elijulile·.
2) Inani lamaphoyinti liyashaywa futhi ukusebenza akulungile (njengokuthi: ukulanda okuhlangene ngaphandle kwerediyasi yokuphakelayo, njll.).
3) Sebenzisa ithuluzi elingalungile (isibonelo: sebenzisa ithuluzi le-D4 elinethuluzi le-D10 lokucubungula).
4) Uhlelo aluhambanga kahle (isibonelo: I-A7.NC iye ku-A9.NC).
I-5) I-handwheel ijikeleza ngendlela engafanele ngesikhathi sokusebenza ngesandla.
6) Cindezela indlela engalungile ngesikhathi sokunqamula ngokushesha (isibonelo: -X cindezela +X).
ngcono:
1) Uma wenza ukulungiselelwa kwethuluzi le-Z-eksisi ejulile, kufanele unake lapho ithuluzi lisethwa khona. (Indawo ephansi, phezulu, indawo yokuhlaziya, njll.).
2) Hlola inani hits kanye nokusebenza ngokuphindaphindiwe ngemva kokuqedwa.
3) Lapho ufaka ithuluzi, lihlole ngokuphindaphindiwe ngeshidi lohlelo nohlelo ngaphambi kokulifaka.
4) Uhlelo kumele lulandelwe ngamunye ngamunye ngokulandelana.
5) Lapho usebenzisa ukusebenza ngesandla, opharetha ngokwakhe kufanele athuthukise amakhono akhe ekusebenziseni ithuluzi lomshini.
6) Uma uhamba ngokushesha, ungaqale uphakamise i-axis ye-Z kucezu lokusebenza ngaphambi kokunyakaza.
Ingxenye 5
Ukunemba kobuso
isizathu:
I-1) Imingcele yokusika ayinangqondo futhi indawo yokusebenza inzima.
I-2) Umkhawulo wokusika wethuluzi awubukhali.
3) I-clamping yamathuluzi yinde kakhulu futhi imvume ye-blade yinde kakhulu.
4) Ukususwa kwe-chip, ukuvunguza komoya, nokushaywa uwoyela akukuhle.
5) Uhlelo lokuphakela ithuluzi lokuhlela (ungazama ukucabangela ukugaya phansi).
6) I-workpiece ine-burrs.
ngcono:
I-1) Imingcele yokusika, ukubekezelelana, izibonelelo, isivinini kanye nezilungiselelo zokuphakelayo kufanele kube okunengqondo.
2) Ithuluzi lidinga opharetha ukuthi alihlole futhi alishintshe ngezikhathi ezithile.
3) Lapho ucindezela ithuluzi, opharetha kudingeka ukuthi agcine i-clamp imfushane ngangokunokwenzeka, futhi i-blade akufanele ibe yinde kakhulu ukugwema umoya.
4) Ukuze unciphise ngemimese eyisicaba, imimese engu-R, nemibese yekhala eyindilinga, isivinini nezilungiselelo zokuphakelayo kufanele zibe nengqondo.
5) I-workpiece inama-burrs: Ihlobene ngokuqondile nethuluzi lethu lomshini, ithuluzi, kanye nendlela yokuphakela amathuluzi, ngakho-ke sidinga ukuqonda ukusebenza kwethuluzi lomshini futhi senze imiphetho ngama-burrs.
Ingxenye 6
i-chipping edge
1) Okuphakelayo ngokushesha kakhulu--yehlisa ijubane elifanele lokuphakelayo.
2) Isiphakeli siyashesha kakhulu ekuqaleni kokusika--yehlisa isivinini sokuphakela ekuqaleni kokusika.
3) Gqoka ngokuxekethile (ithuluzi) - qinisa.
4) I-clamp loose (i-workpiece) - i-clamp.
5) Ukuqina okunganele (ithuluzi) - Sebenzisa ithuluzi elifushane elivunyelwe, cindezela isibambo sijule, bese uzama ukugaya.
6) Unqenqema lokusika lwethuluzi lubukhali kakhulu - shintsha i-angle enqenqemeni yokusika, umphetho oyinhloko.
7) Ithuluzi lomshini nesibambi samathuluzi aziqinile ngokwanele - sebenzisa ithuluzi lomshini nesibambi samathuluzi ngokuqina okuhle.
Ingxenye 7
ukuguga
1) Ijubane lomshini liyashesha kakhulu - yehlisa ijubane bese wengeza isipholile esanele.
2) Izinto eziqinile - sebenzisa amathuluzi okusika athuthukile nezinto zamathuluzi, futhi wandise izindlela zokwelapha ezingaphezulu.
3) Ukunamathela kwe-chip - shintsha isivinini sokudla, usayizi we-chip noma sebenzisa amafutha okupholisa noma isibhamu somoya ukuze uhlanze ama-chips.
4) Ijubane lokuphakelayo alifanelekile (liphansi kakhulu) - khulisa isivinini sokuphakela bese uzama ukwehlisa ukugaya.
5) I-engeli yokusika ayifanelekile--yiguqule ibe yi-engeli yokusika efanele.
6) I-engeli eyinhloko yokusiza yethuluzi incane kakhulu - ishintshe ibe i-engeli yokukhulula enkulu.
Ingxenye 8
iphethini yokudlidliza
1) Okuphakelayo nesivinini sokusika kuyashesha kakhulu--lungisa okuphakelayo nesivinini sokusika
2) Ukuqina okunganele (ithuluzi lomshini nesibambi samathuluzi) -sebenzisa amathuluzi omshini angcono nabaphathi bamathuluzi noma shintsha izimo zokusika
3) I-engeli yokukhulula inkulu kakhulu - iguqule ibe i-engeli yokukhulula encane bese ucubungula unqenqema (sebenzisa i-whetstone ukuze ulole umphetho kanye)
4) Gcoba ngokuxekethile--cindezela ucezu lokusebenza
5) Cabangela isivinini kanye nenani lokuphakelayo
Ubudlelwano phakathi kwezinto ezintathu zejubane, ukondla kanye nokujula kokusika kuyisici esibaluleke kakhulu ekunqumeni umphumela wokusika. Okuphakelayo okungalungile kanye nesivinini kuvame ukuholela ekunciphiseni kokukhiqiza, ikhwalithi yengcezu yokusebenza ephansi, kanye nokulimala okukhulu kwamathuluzi.
Isikhathi sokuthumela: Jan-03-2024
