Umshini Wokuphenduka Oshisayo We-CNC Uyathengiswa
Isici
1. Ikhwalithi iqinisekisiwe, ngohlelo oluphelele lokukhiqiza kanye nocwaningo nokuthuthukiswa, olungakhiqiza futhi lusekele imikhiqizo nemishini ehlukahlukene, egxile kumakhasimende.
Umuzwa womkhiqizo kanye nesevisi, ukukunikeza isevisi enhle.
2. Umkhiqizo usetshenziswa kabanzi, futhi umkhiqizo unezici zokunemba okuphezulu, amandla okusika aqinile, ukusebenza okulula, ukuphepha okuphezulu, nokugcinwa kalula.
Thuthukisa ngempumelelo ukukhiqiza, futhi usebenzise futhi usebenzise uhla olubanzi lwezimboni.
3. Ithuluzi lomshini lenziwe ngensimbi enamandla amakhulu, futhi ukucindezeleka kwangaphakathi kwezingxenye zethuluzi lomshini kuqedwa ngemva kokuvama okuphezulu nokwelashwa kokuguga kokudlidliza. Ngakho-ke, izingxenye ziqinile futhi azikhubazeki kalula.
4. Umzila wesitimela wethuluzi lomshini ukushisa ukuphathwa imvamisa yomsindo omkhulu, futhi i-coefficient yokungqubuzana yehliselwa kokuncane, ukuze kuqinisekiswe ukuthi ukunemba komshini wethuluzi lomshini kuzohlala kungashintshiwe isikhathi eside.
5. Ithuluzi lomshini lifakwe uhlelo lokuhlinzeka ngamafutha okugcoba okuzenzakalelayo.
6. Yamukela ubuchwepheshe bokushintsha isivinini se-elekthronikhi obusezingeni eliphezulu.
7. Iphaneli yokulawula emaphakathi yenza ukulawula nokusebenza kusebenze kahle.
8. I-spindle motor inamandla okusika aqinile futhi ithuthukisa ukusebenza kahle kokukhiqiza.
Amapharamitha
| Iphrojekthi | Amayunithi | I-MH-600-1NC | |
| Amandla okucubungula | Icubungula Ububanzi | MM | 30* 30-650*650 |
| Machining The Maximum Ukujiya | MM | 240 | |
| Ibhentshi Lokusebenza | KG | 800 | |
| Ukunemba | Ukunemba kweDimensional | MM | 0.01-0.02 |
| Ukuma | MM | 0.02 | |
| I-engeli yesokudla | MM | 0.008 | |
| X/Y/Z Axis Travel | I-X Spindle Stroke | MM | 1015 |
| I-Y/Z Spindle Stroke | MM | 500 | |
| Izinga lokuphakelayo | I-X-Axis Rapid Displacement | M | 10 |
| I-Y/Z Axis Rapid Displacement | M | 10 | |
| I-spindle | I-Spindle (I-Taper) | BT | I-BT50 |
| Isivinini se-Spindle | rpm/min | 50-600 | |
| I-Cutter Diameter | MM | 250 | |
| Imoto | Spindle Servo Motor | KW | 11 |
| I-X-Axis Servo Motor | KW | 3 | |
| I-Y/Z Axis Servo Motor | KW | 2 | |
| I-Fourth Axis Servo Motor | KW | 2 | |
| Injini Yokuqondisa Emile (Hydraulic) | KW | 2.2 | |
| Ibhentshi lokusebenzela | Dayela Ububanzi Bobuso | MM | 380 |
| I-Disk Indexing | Sebenzisa | 5°-Ukuhlukana | |
| Okunye | Isisindo Somshini | KG | 8000KG |
| Ubukhulu | MM MM | 3200*3800*2300 |
