I-High Cork Floor Starling Drill Press Press
Ubuso
1. Ukusebenza kahle okuphezulu kanye nokusindisa amandla ngejubane ezimbili. Imoto ingashintsha isivinini isinyathelo ngesinyathelo ngokuya ngezidingo zohlobo lomthwalo.
2. Ukushintshwa kwamandla okuhlanganisiwe. Idizayini yenoveli, ukubukeka okuhle nokusebenza okulula.
3. Ukulungiswa kwejubane le-spindle. Izidingo zokucubungula ze-GNU Workiecle, lungisa izidingo zejubane elifanele, kulula ukusebenza.
4. Ibha ye-scale eqondile. Kuyinto elula ngesikhathi sokucubungula, futhi ukujula kokucubungula kungaziwa ngokucacile.
I-5. Isimo esiphuthumayo esisodwa. Lapho umsebenzi wokusebenza ungafanele, le nkinobho ingathathwa izithombe ukuze iyeke ngokushesha ithuluzi lomshini futhi linciphise ukulahleka.
6. Idivayisi yokupholisa. Vikela ukushisa ngethuluzi kusuka ekutholeni ukucubungula kwe-WorkPeas futhi kwandise impilo yenkonzo yethuluzi.
| Ukuthayipha | Umshini wokumba okuma mpo wama-cylindrical mpo |
| Phawula | I-MSK |
| Amandla wemoto eyinhloko | 2.2 (kW) |
| Ubukhulu | I-108X62X245 (MM) |
| Inani lama-axes | I-Axis Excer |
| Ibanga le-Drilling Dimege | 40 (mm) |
| I-Spindle Speed Range | I-42-2050 (RPM) |
| Spindle hole tpea | I-MT4 |
| Ifomu lokulawula | -Okuzenzisa |
| Izimboni ezisebenzayo | -Ezwe lonke |
| Ifomu lokuhlelwa | -Mile thwi |
| Scope of isicelo | -Ezwe lonke |
| Izinto ezibonakalayo | Insimbi yanama ini |
| Uhlobo lomkhiqizo | Kusha sha |
| Inkonzo Yezentengiso Ngemuva | Iwaranti Enye Yonyaka |
Ukucacisa
| Inombolo yento: | Z5025 | Z5025-8 | Z5030 |
| Ububanzi obuphezulu bokumba mm | 25 | 25 | 30 |
| Ubuningi bokuthepha ububanzi mm | / | / | I-M20 |
| Ububanzi bekholomu mm | 100 | 100 | I-120 |
| UMax Stroke weSpindle mm | I-150 | I-150 | 135 |
| Ibanga kusuka esikhungweni se-Spindle to Column Busbar MM | I-225 | I-225 | 320 |
| Ibanga eliphakeme ukusuka ekupheleni kwe-spindle ku-mm ezisebenzayo | 630 | / | I-550 |
| Ibanga eliphakeme ukusuka ekupheleni kwe-spindle kutafula lesisekelo, mm | I-1070 | I-550 | 1100 |
| Spindle TAPER | I-MT3 | I-MT3 | I-MT3 |
| I-Spindle rotation ibanga R / min | 100-2900 | I-100 ~ 2900 | 65-2600 |
| Uchungechunge lwe-spindle | 8 | 8 | 12 |
| I-spindle feed mm / r | / | / | I-0.1 / 0.2 / 0.3 |
| Usayizi wethebula mm | 440 | / | 500/440 |
| Itafula unhlangothi mm | I-560 | I-560 | 490 |
| Usayizi wesisekelo mm | 690 * 500 | 690 * 500 | 400 * 390 |
| Ukuphakama okuphelele / mm | 1900 | 1390 | I-2050 |
| motor w | 750/1100 | 750/1100 | 850/1100 |
| Ukupholisa motor motor | 40 | 40 | 40 |
| Isisindo esikhulu / isisindo se-net kg | 300/290 | 235/225 | 495/45050 |
| Usayizi wokupakisha cm | 70 * 56 * 182 | 78 * 52 * 117 | 108 * 62 * 215 |
