I-DIN338 HSSCO M35 I-Double End Twist Drills 3.0-5.2mm
INCAZELO YOMKHIQIZO
Izici:
1. Ifanele izimbobo zokubhoboza ngensimbi engagqwali, i-die steel, i-aluminium alloy, i-cast iron, ithusi, ipayipi likathayela nezinye izinto zensimbi.
2. Ukuqina okuphezulu, ukumelana nokugqoka, ukuma okunembile, ukukhishwa okuhle kwe-chip nokusebenza okuphezulu
3. Insimbi egoqwe ngamakhaza kuphela engasetshenziswa, ecinyiwe futhi ecishiwe futhi insimbi epholile ivinjelwe ngokuqinile.
ISINCOMO SOKUSETSHENZISWA EZINKUFUNDENI
| Ububanzi | Ubude Obuphelele | Ubude Bomtshingo | Ama-PC/Ibhokisi |
| 3.0mm | 45 mm | 15.5mm | 10 |
| 3.2mm | 49 mm | 16 mm | 10 |
| 3.5mm | 52 mm | 17mm | 10 |
| 4.0mm | 53 mm | 17.5mm | 10 |
| 4.2mm | 55 mm | 18.5mm | 10 |
| 4.5mm | 55 mm | 18.5mm | 10 |
| 5.0mm | 60mm | 20mm | 10 |
| 5.2mm | 60mm | 20mm | 10 |
| Ibhrendi | I-MSKT | Ukugqoka | No |
| Igama Lomkhiqizo | I-Double End Twist Drill | Okujwayelekile | I-DIN338 |
| Okubalulekile | I-HSSCO | Sebenzisa | I-Hand Drill |
Qaphela
Amathiphu okusebenza kokucubungula i-electric drill:
1. I-12V i-lithium drill kagesi ayinconywa ngenxa ye-torque ephansi, i-24V, 48V i-lithium drill kagesi iyanconywa.
2. Lapho ubhoboza, i-drill bit kanye ne-stainless steel plate ku-perpendicular to 90 degrees,
3. Uma imbobo inkulu kuno-6mm, qala usebenzise u-3.2-4mm ukubhoboza imbobo encane, bese usebenzisa i-drill enkulu ukuze unwebe imbobo.
4. I-drill chuck kagesi kufanele ibambe i-drill eneziphetho ezimbili. Lapho ingxenye eveziwe iba mfishane, iba ngcono. I-cut cut of the drill ayidingi ukuba bukhali kakhulu noma bukhali kakhulu.
5. Ijubane le-drill kagesi kufanele libe phakathi kuka-800-1500. Umphumela akufanele ube mkhulu kakhulu.
6. Ngaphambi kokubhoboza imbobo, ungasebenzisa isampula yesibhakela (noma isikhonkwane esikhundleni salokho) ukuze ushaye indawo emaphakathi endaweni yokubhoboza kuqala, futhi i-drill bit ngeke iphambuke.
