YJ 2/3/4 Flutes M2AL HSS End Mill
Features
Compared with standard milling cutters, YJ milling cutters are characterized by: simple, bright, unique, novel, and distinct appearance; geometric accuracy is 40% higher than that of standard products, and it is recommended for rough milling, semi-finishing and suitable for finishing; The front and rear corners are smooth, so that the cutting edge is sharp and the chip removal is brisk. Relief edge width increased by 15%. The strength is improved, stable and reliable; after a unique process, the service life is twice that of the standard milling cutter, and it has a high cost performance. It can be used for both general-purpose equipment in traditional milling methods and CNC equipment.
M2AI is a cobalt-free superhard high-speed steel containing aluminum, and vacuum heating promotes abnormal grain growth. Filling inert gas to perform vacuum heating can increase the heating rate, hinder the formation of abnormally large grains, and improve the strength and toughness of M2AI steel. The most important factor affecting the strength and toughness of M2AI steel is not the size of mixed grains and austenite grains, but the morphology and distribution of carbides in the steel. In order to exert the superhardness of M2AI steel, the vacuum quenching temperature can be increased to make the hardness more than 66HRC.
Recommendation
The hardness of the processing material is within 32 degrees
4-blade flat corner use
3 blades for aluminum products
2 blades are suitable for keyway
|
Size |
Flutes Diameter |
Shank Diameter |
Flute Length |
Total Length |
|
1.5*6*5*51 |
1.5 |
6 |
5 |
51 |
|
2*6*7*51 |
2 |
6 |
7 |
51 |
|
2.5*6*8*52 |
2.5 |
6 |
8 |
52 |
|
3*6*8*52 |
3 |
6 |
8 |
52 |
|
4*6*11*55 |
4 |
6 |
11 |
55 |
|
5*6*13*57 |
5 |
6 |
13 |
57 |
|
6*6*13*57 |
6 |
6 |
13 |
57 |
|
7*8*19*63 |
7 |
8 |
19 |
63 |
|
8*8*19*63 |
8 |
8 |
19 |
63 |
|
9*10*22*72 |
9 |
10 |
22 |
72 |
|
10*10*22*72 |
10 |
10 |
22 |
72 |
|
11*12*26*83 |
11 |
12 |
26 |
83 |
|
12*12*26*83 |
12 |
12 |
26 |
83 |
|
13*12*26*83 |
13 |
12 |
26 |
83 |
|
14*12*26*83 |
14 |
12 |
26 |
83 |
|
15*16*32*92 |
15 |
16 |
32 |
92 |
|
16*16*32*92 |
16 |
16 |
32 |
92 |
|
17*16*32*92 |
17 |
16 |
32 |
92 |
|
18*16*32*92 |
18 |
16 |
32 |
92 |
|
19*20*38*104 |
19 |
20 |
38 |
104 |
|
20*20*38*104 |
20 |
20 |
38 |
104 |
