I-PCB ye-Drill yeBhodi yeBhodi ye-Drill Drill Bill CNC ibhalisisa iBhodi yeSekethe

Izixhobo:I-carbide; Intsimbi ye-tungsten

Inkqubo yokulinganisa:Metric

Isixhobo sohlobo lweFlute:Spiral

I-Shank Seameter:3.175mm

Ubude becala:+ -38mm

Thumela i-imeyile kuthi

Iinkcukacha zemveliso

Iimpawu zeMveliso

INGCACISO YEMVELISO

Le PCB ye-PCB ye-Drill iqulathe i-10 ye-bits yobukhulu be-bit: 0.3mm, i-0.4mm, i-0.8mm, i-0.8 mm, i-0.9 mm, i-1.1mm, i-1.1mm. Kwaye ubungakanani ngasinye bane-PC ezi-5. Ukwahluka ubungakanani bokuhlangabezana neemfuno ezahlukeneyo.

Inqaku

Ezi bit ezincinci ze-microll zenzelwe ukuqhuba kwaye zikrole kwibhodi yesephakhesha kunye nomnye umsebenzi ochanekileyo. I-PCB Drill Bits yenziwa ngentsimbi ekumgangatho ophezulu we-tungsten, ukuxhathisa kakhulu, ubunzima obukhulu, ukugoba, ukungavisisani, ukusebenza kakuhle. Uyilo lwe-seismic kwibala le-blade lubenza ukuba bahlale bezinzile ngexesha elikrwele.

I-PCB Drill Bits iseti inkulu kwiBhodi yeSekethe eprintiweyo, i-3D ye-3D ye-Ozzle, i-Gebrass ye-Plexiglass, i-Bekelite, iplastiki, iplastiki yentsimbi kunye nezinye iipilisi zentsimbi; Ukusika kunye nokubhabha kwaye kusebenze kwi-Acrylic, i-PVC, inyc, i-resin, fiberglass, njl.

PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Iphakheji enebhokisi ephezulu yeplastiki ephezulu, ukuthwala ngokulula kunye nokukhuselwa okungcono kugcina iimpahla zeBlade ekuhanjisweni kwezonakeleyo.

Inzuzo

I-1. Phakamisa kakhulu

I-PCB Drill Bits yenziwa ngentsimbi ekumgangatho ophezulu we-tungsten, ukuxhathisa kakhulu, ubunzima obukhulu, ukugoba, ukungavisisani, ukusebenza kakuhle.

2.Ukuchaneka okuphezulu

With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left.

3.Iphathwayo kwaye kulula ukuyigcina

I-drills yesandla iseti incinci ngobukhulu, ukuze ubagcine kwibhokisi yakho yezixhobo ngokulula kwaye uzisebenzise naphi na.

Umphezulu ococekileyo, akukho lula ukuqhekeza.

Phawula:

I-1) I-PCB ye-PCB ye-bill engezantsi kwe-0.5mm kulula ukwaphula kuba zincinci kwaye zincinci. Kucetyiswa ukuba ulumke xa uzisebenzisa.

2) Musa ukusebenzisa izinto ezinzima kakhulu, njenge-fresh enkulu yentsimbi.

3) Kuya kufuneka ufake isicelo ngokulinganayo kwaye nkqo ngelixa usebenzisa. Sukuchukumisa ibala ngezandla zakho okanye amandla angaphandle ukuthintela ukonakala.