HRC55 4 Flute Corner Rounding End Mill

Uphawu:

I-1.I-Coating: i-TiSiN, enobunzima obuphezulu kakhulu kunye nokumelana nokunxiba kakuhle.

Ukunyamezelana kwe-End Mill Diameter:1＜D≤6 -0.010～-0.030;6＜D≤10 -0.015～-0.040;10＜D≤20 -0.020～-0.050

Uyilo loMda wokusika: Irediyasi yeKona, ayikhululekanga ukuqhekeka, isetyenziswa ngokubanzi ekusikeni ngesantya esiphezulu

2. Uyilo oluphindwe kabini luphucula ukuqina kunye nokugqiba umphezulu ngokufanelekileyo.Ukusika umgca phezu kweziko kunciphisa ukuchasana kokusika.Umthamo ophezulu we-junk slot unceda ukususwa kwetshiphu kunye nokwandisa ukusebenza kakuhle komatshini.

Imiyalelo yokusetyenziswa

Ukuze ufumane indawo engcono yokusika kunye nokwandisa ubomi besixhobo.Qinisekisa ukusebenzisa ukuchaneka okuphezulu, ukuqina okuphezulu, kunye nezibambi zezixhobo ezilungelelanisiweyo.

1. Ngaphambi kokusebenzisa esi sixhobo, nceda ulinganise ukuphambuka kwesixhobo.Xa ukuchaneka kwesixhobo sokuphambuka kudlula i-0.01mm, nceda ulungise ngaphambi kokusika

2. Ubude obufutshane besixhobo esiphuma kwi-chuck, ngcono.Ukuba isixhobo esiphumayo sinde, nceda unciphise isantya sokulwa, isantya sokutya okanye ukusika inani uwedwa

3. Ukuba ukungcangcazela okungaqhelekanga okanye ingxolo kwenzeka ngexesha lokusika, nceda unciphise isantya se-spindle kunye nesixa sokusika de kube imeko itshintshile.

4. Izinto zensimbi zipholile nge-spray okanye i-jet yomoya njengendlela esebenzayo yokwenza i-titanium ephezulu ye-aluminium ibe nefuthe elihle.Kucetyiswa ukuba kusetyenziswe ulwelo lokusika olungaxutywanga ngamanzi kwinsimbi engenasici, i-titanium alloy okanye i-alloy-resistant alloy.

5. Indlela yokusika ichaphazeleka ngumsebenzi, umatshini, kunye nesoftware.Le datha ingentla yeyokukhangela.Emva kokuba imeko yokusika izinzile, ukwandisa izinga lokutya nge-30% -50%.

Sebenzisa:

Isetyenziswa kakhulu kwiinkalo ezininzi

Ukwenziwa kweAviation

Ukuveliswa koomatshini

Umenzi wemoto

Ukwenza umngundo

Ukwenziwa koMbane

Ukusetyenzwa kweLathe