ANSI #00 #1 #2 #3 #4 #5 #6 1/8” Centre Drill
IFATRUE
1. Ukusebenzisa umgangatho ophezulu we-W6Mo5Cr4V21, emva kokunyangwa kobushushu obuqinileyo, ubunzima bokucima buzinzile, ukuqina kukuhle, ukunyanzeliswa kokugqoka kunamandla, ukuchasa ukuchithwa kunamandla, kwaye ubomi benkonzo bude.
2. Yonke inkqubo yokugaya iyamkelwa, ukubunjwa ngokubanzi kwenziwa, kwaye ubukhulu buzinzile. Ukuchaneka okuphezulu kunye nokusebenza okuzinzileyo. Ukugqiba umgangatho olungileyo, umhle kwaye uyasebenza.
3. Ukuqina konyango lobushushu ukuya kuthi ga kwi-HRC45 HRC, amandla amazinyo aphezulu, ukusika okubukhali kunye nokusebenza kakuhle okuphezulu.
4. Iziko lokugaya libekwe ngokuchanekileyo, ukuxhatshazwa kokugqoka kulungile, kwaye akulula ukuphuka.
UMYALELO
1. Uhlobo lwe-A center drill sisixhobo sokusika kwaye sisetyenziselwa ukugaya isinyithi. Umsebenzisi kufuneka akhethe uhlobo loqheliso lwaseziko ngokufanelekileyo ngokohlobo lomngxuma kunye nobukhulu berula yamalungu aza kucutshungulwa.
2. I-drill yohlobo lwe-A inobunzima be-degrees ezingama-65 kwaye ingasetyenziselwa unyango olushushu lwensimbi enqabileyo enobunzima be-degrees ezingama-40, kunye nensimbi engenasici yokugaya.
3. Ngaphambi kokuba isixhobo sisetyenziswe kwakhona, i-grease anti-rust kufuneka ihlanjwe ukuze ithintele ii-chips ukuba zinganamatheli kumgca wokusika kunye nokuchaphazela ukusebenza kokusika.
4. Xa usebenza nge-manual drill, i-drill yeziko kufuneka ifezekise ukuchaneka kwendawo efunekayo
5. Umphezulu womsebenzi oza kucutshungulwa kufuneka ube ngokuthe tye, kwaye kungabikho imingxuma yesanti okanye iindawo ezinzima ukuphepha umonakalo kwisixhobo.
6. Ukusika ulwelo: Khetha ulwelo oluhlukeneyo lokusika ngokwento yokulungisa, kwaye ukupholisa kufuneka kwanele
7. Imiba efuna ingqwalasela: Ukuba kukho imeko engaqhelekanga ngexesha lokucubungula, kufuneka imiswe ngokukhawuleza, kwaye isizathu sinokufunyanwa ngaphambi kokuba siqhutywe. Nikelani ingqalelo ekunxibeni komgca wokusika kwaye uyilungise ngexesha; emva kokusebenzisa isixhobo, hlambulula ioli phezu komhlaba kwaye uyigcine ngokufanelekileyo.
| Uphawu | MSK | MOQ | 10 |
| Igama lemveliso | Centre drill | Ukupakisha | Ibhokisi yePlastiki |
| Izinto eziphathekayo | HSSM2 | Sebenzisa | Ubhedu, i-alloy ye-aluminium |
| Ububanzi | Drill Dia d | Umzimba weDiya d1 | Ubude beDrill L1 | Ubude bubonke L |
| #00 | 0.025″ | 1/8 | 0.030 | 1-1/8 |
| #0 | 1/32 | 1/8 | 0.038 | 1-1/8 |
| #1 | 3/64 | 1/8 | 3/64 | 1-1/4 |
| #2 | 5/64 | 3/16 | 5/64 | 1-7/8 |
| #3 | 7/64 | 1/4 | 7/64 | 2 |
| #4 | 1/8 | 5/16 | 1/8 | 2-1/8 |
| #5 | 3/16 | 7/16 | 3/16 | 2-3/4 |
| #6 | 7/32 | 1/2 | 7/32 | 3 |
| #7 | 1/4 | 5/8 | 1/4 | 3-1/4 |
| #8 | 5/16 | 3/4 | 5/16 | 3-1/2 |
