Umnini weSixhobo sokuSila se-CNC esichanekileyo
Igama lebrand: MSK
Izinto eziphathekayo: i-carbide
Umbala: Silver
Ubungakanani bomyalelo: 1pc
Ixabiso: 14-30dollar
Imveliso nganye
Ubude * ububanzi * ubude: 6x5x5 cm
Ubunzima obupheleleyo bempahla yorhwebo nganye: 0.020 kg
Umhla wokuhanjiswa kunye neentsuku ezingama-20
-Bangaphi ngaphantsi kwama-2000
Ubuninzi obunye
Inani leisampulu 2
Isampulu yexabiso leyunithi 2
Ubungakanani bephakheji yangaphandle yemveliso enye L * w * H: 10×1.5×1.5 cm
Ukupakisha ubunzima bemveliso enye kg: 0.030 kg
Kukho zonke iinkonzo ezilungiselelweyo, ezingaphezulu kwama-50
Ukusebenzisa umgangatho ophezulu wensimbi ye-20CrMnTi, ubomi benkonzo bude.Yamkela i-carburizing kunye nenkqubo yokucima, kunye nobunzima obuphezulu bomhlaba, ukuxhathisa okuqinileyo kunye nokumelana nokunxiba okuphezulu.Igcina amandla kunye nokuqina kwentsimbi ye-carbon ephantsi kwisiseko emva kokucima, ukwenzela ukuba isibambo sinokumelana nempembelelo ethile kunye nomthwalo.Olu hlobo lokubamba lufakwe i-carburized kwaye lucinywe Ubunzima bungaphantsi okanye bulingana ne-HRC56, kwaye ubunzulu be-carburizing bukhulu kuno-0.8 mm.
Inzuzo yenkqubo, ukuchaneka okuphezulu.Ukuchaneka komzimba kungaphantsi okanye ukulingana no-0.003 mm, kwaye ukuphambuka kwe-chuck ephezulu echanekileyo ingaphantsi okanye ilingana ne-0.008 mm.
Indlela yokulinganisa echanekileyo yokuchaneka komzimba
Amanqaku ovavanyo oluchanekileyo:
Ngaphambi kokuvavanya ukuchaneka, qinisekisa ukuba ukuchaneka kwe-spindle isixhobo somatshini, ukuchaneka komnini wesixhobo, kunye nokuchaneka kwesixhobo zonke zichanekile kwaye ngaphakathi kwinqanaba eliqhelekileyo lexabiso ngaphambi kokuba ukuchaneka kwe-collet kunokulinganiswa.
Ukulumkela:
Ukudityaniswa okungalunganga kungonakalisa ukuchaneka kwe-collet chuck kwaye kunokubangela umonakalo kwi nut.
Sebenzisa kuphela i-collet chucks ehambelanayo ukudibanisa i-nut.
Musa ukuqhobosha izixhobo ezingaphaya koluhlu lokubamba.
| Igama lemveliso | CNCHigh Precision MillingUmphathi wesixhobo | Izinto eziphathekayo | Intsimbi ekumgangatho ophezulu 20CrMnTi |
| Uburhabaxa bomphezulu | > 0.8mm | Ukuqina | <=HRC65 |
Umgaqo wesixhobo sokubamba ibhalansi eguqukayo:
Umgaqo wolungelelwaniso oluguquguqukayo lwezixhobo ezijikelezayo ufana naloo malungu ajikelezayo ngokubanzi.Ubunzima obulinganisiweyo obulinganisiweyo kunye nesikhundla sinokulungelelaniswa ngokususa ubunzima be-eccentric okanye ukulungelelanisa i-counterweight.Emva kokuba ibhalansi eguquguqukayo isetyenzisiwe, ukulungiswa kwesixhobo kuzinzile, ukuchaneka kuzinzile, ukunyakaza kuncinci, kwaye isantya siphezulu.Iyakwazi ukuqonda i-high-speed machining yesixhobo, isantya sinokufikelela kwi-25000/30000 rpm.
Ukuba ufuna nayiphi na ingcaciso ekhethekileyo, nceda uqhagamshelane nathi ngobubele.
