Suitable for high-rigidity 3-flute ball nose milling cutter
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Material | Ordinary steel / Quenched and tempered steel / High hardness steel ~ HRC55 / High hardness steel ~ HRC60 / High hardness steel ~ HRC65 / Stainless steel / Cast iron |
Number of flutes | 3 |
Flute Diameter D | 3-20 |
Brand | MSK |
Shank Diameter | 4-20 |
Package | Carton |
End cut Type | Ball nose type |
Flute Length(ℓ)(mm) | 6-20 |
Cut Type | Rounded |
Flute Diameter D | Flute Length L1 | Shank Diameter d | Length L |
3 | 6 | 4 | 50 |
4 | 8 | 4 | 50 |
5 | 10 | 6 | 50 |
6 | 12 | 6 | 50 |
7 | 16 | 8 | 60 |
8 | 16 | 8 | 60 |
9 | 20 | 10 | 70 |
10 | 20 | 10 | 70 |
12 | 20 | 12 | 75 |
14 | 25 | 14 | 80 |
16 | 25 | 16 | 80 |
18 | 40 | 18 | 100 |
20 | 40 | 20 | 100 |
Use:
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing