HRC55 Carbide 2 Flute Standard Length End Mills
Lintho tse tala: Sebelisa ZK30UF ka 12% Co content le 0.6um ea lijo-thollo
Ho roala: AlTiSiN, ka ho thatafala le botsitso ba mocheso li fihla ho 4000HV le 1200 ℃, ka ho latellana.
Mamello ea End Mill Diameter: 1 < D≤6 -0.010 ~ -0.030;6 < D≤10 -0.015 ~ -0.040;10 < D≤20 -0.020 ~ -0.050 ~ -0.050
Coating:AlTiSiN, litaba tse phahameng tsa aluminium li fana ka boima bo matla bo chesang le ho hanyetsa oxidation.
Flutes: Likoluoa tse 2, tse ntle bakeng sa ho tlosoa ha chip ha bonolo bakeng sa ts'ebetso ea phepelo e otlolohileng, e sebelisoang haholo ho ts'ebetso ea slot le lesoba.
Mamello ea End Mill Diameter:
1<D≤6 -0.010~-0.030
6<D≤10 -0.015~-0.040
10<D≤20 -0.020~-0.050
Ho khaola li-Parameters:
Vc =220(100-800)m/min
ap=1/2D(1/8-3/4D)
ae=1/2D(1/4-1D)
fz=0.15mm(0.02-0.2)
The spiral angle is 35 degrees, e nang le matla a ho ikamahanya le maemo ho thepa le ha
Tlhaloso:
Ntho NO. | Diameter D | Bolelele ba ho Seha | Shank Diameter | Kakaretso Bolelele | Flutes |
MSKEM4FD001 | 3 | 8 | 3 | 50 | 2 |
MSKEM4FD002 | 1 | 3 | 4 | 50 | 2 |
MSKEM4FD003 | 1.5 | 4 | 4 | 50 | 2 |
MSKEM4FD004 | 2 | 6 | 4 | 50 | 2 |
MSKEM4FD005 | 2.5 | 7 | 4 | 50 | 2 |
MSKEM4FD006 | 3 | 8 | 4 | 50 | 2 |
MSKEM4FD007 | 4 | 10 | 4 | 50 | 2 |
MSKEM4FD008 | 5 | 13 | 5 | 50 | 2 |
MSKEM4FD009 | 5 | 13 | 6 | 50 | 2 |
MSKEM4FD010 | 6 | 15 | 6 | 50 | 2 |
MSKEM4FD011 | 7 | 18 | 8 | 60 | 2 |
MSKEM4FD012 | 8 | 20 | 8 | 60 | 2 |
MSKEM4FD013 | 10 | 25 | 10 | 75 | 2 |
MSKEM4FD014 | 12 | 30 | 12 | 75 | 2 |
MSKEM4FD015 | 14 | 35 | 14 | 80 | 2 |
MSKEM4FD016 | 14 | 45 | 14 | 100 | 2 |
MSKEM4FD017 | 16 | 45 | 16 | 100 | 2 |
MSKEM4FD018 | 18 | 45 | 18 | 100 | 2 |
MSKEM4FD019 | 20 | 45 | 20 | 100 | 2 |
Lisebelisoa tsa Workpiece | ||||||
Tšepe ea Carbon | Alloy Steel | Tšepe ea ho Lahlela | Aluminium Alloy | Motsoako oa Koporo | Ts'epe e sa beng le mabali | Tšepe e thata |
E loketse | E loketse | E loketse | E loketse | E loketse |