HRC45 End Mill Cutting Tools Roughing End Mill Cutter
Li-mill tsa ho qetela li na le li-scallops ka bophara ba ka ntle tse etsang hore li-chips tsa tšepe li robehe likarolong tse nyenyane.Sena se fella ka khatello e tlase ea ho itšeha ka botebo bo fanoeng ke radial ea sehiloeng.
Sebopeho:
Moralo oa Sharp wave le 35 helix angle e ntlafatsa bokhoni ba ho tlosa chip, bo sebelisoang haholo ho slot, profil, ho sila ka thata.
Molemo:
1. Ho tlosoa ha li-chips tse nang le matla a maholo ho na le seha se matla, 'me seha se rometsoeng se boreleli, se ka hlokomelang ts'ebetso e phahameng haholo.
2.Sebopeho sa chamfered sa ho sebetsana se etsa hore ho be bonolo ho kenya le ho koala, chamfer e boreleli ebile e khanyang, e pota-potile ebile e tiile, e ntle ebile e sebetsa.
Litaelo tsa tšebeliso
1. Pele o sebelisa sesebelisoa sena, ka kopo lekanya ho kheloha ha sesebelisoa.Haeba ho nepahala ha sesebelisoa ho feta 0.01mm, ka kopo e lokise pele u seha.
2. E khuts'oane bolelele ba ho atolosoa ha sesebelisoa ho tloha chuck, ho molemo.Haeba katoloso ea sesebelisoa e le telele, ka kopo fetola lebelo, lebelo la ho in/out kapa palo ea ho itšeha u le mong.
3. Haeba ho sisinyeha ho sa tloaelehang kapa molumo o hlaha nakong ea ho itšeha, ka kopo fokotsa lebelo la spindle le ho itšeha ho fihlela boemo bo ntlafala.
4. Mokhoa o khethiloeng oa thepa ea tšepe e pholileng ke spray kapa air jet, e le ho sebelisa li-cutters ho finyella liphello tse molemo.Ho kgothaletswa ho sebelisa metsi a sehang a sehang ka metsi bakeng sa tšepe e sa hloekang, alloy ea titanium kapa alloy e thibelang mocheso.
5. Mokhoa oa ho itšeha o angoa ke workpiece, mochine, le software.Lintlha tse ka holimo ke tsa litšupiso feela.Ka mor'a hore boemo ba ho itšeha bo tsitsitse, tekanyo ea lijo e tla eketseha ka 30% -50%.
Brand | MSK | Lintho tse bonahalang | Stainless steel, die steel, plastic, alloy steel, koporo, jj. |
Mofuta | Qetella Mill | Flute Diameter D(mm) | 6-20 |
Head Diameter d (mm) |
| Bolelele (ℓ)(mm) | 50-100 |
Setifikeiti |
| Sephutheloana | Lebokose |
Molemo:
Flute Diameter(mm) | Bolelele ba Flute(mm) | Bophara ba Hlooho(mm) | Bolelele(mm) | Flute |
4 | 10 | 4 | 50 | 3/4 |
6 | 16 | 6 | 50 | 3/4 |
8 | 20 | 8 | 60 | 3/4 |
10 | 25 | 10 | 75 | 3/4 |
12 | 30 | 12 | 75 | 3/4 |
16 | 40 | 16 | 100 | 3/4 |
20 | 45 | 20 | 100 | 3/4 |
Sebelisa:
E sebelisoa haholo libakeng tse ngata
Ho Etsa Lifofane
Tlhahiso ea Mochini
Moetsi oa likoloi
Ho etsa hlobo
Motlakase Manufacturing
Ts'ebetso ea lathe