Selling Best Turning Insert For Stainless Steel
PRODUCT DESCRIPTION
High-efficiency machining of stainless steel special inserts / wear-resistant and practical / smooth chip breaking
FEATURES
1. The blade surface adopts advanced coating technology, which improves the service life.
2. The overall hardness of the blade is stronger, the cutting edge is sharper and more wear-resistant, and the service life is longer.
3. High-precision blades, effectively reduce friction and reduce wear and tear.
| Brand | MSK | Applicable | Lathe |
| Product Name | Carbide Inserts | Model | WNMG080408 |
| Material | Carbide | Type | Turning Tool |
NOTICE
Analysis of common problems
1. Rake face wear: (this is the common practical form)
Effects: Gradual changes in workpiece dimensions or reduced surface finish.
Reason: The blade material is not suitable, and the cutting amount is too large.
Measures: Choose a harder material, reduce the amount of cutting, and reduce the cutting speed.
2. Crash problem: (bad form of effectiveness)
Effects: Sudden changes in workpiece size or surface finish, resulting in sparking surface burrs. ,
Reason: improper parameter setting, improper selection of blade material, poor rigidity of workpiece, unstable blade clamping. Action: Check the machining parameters, such as reducing the line speed and changing to a higher wear-resistant insert.
3. Severely broken: (very bad form of effectiveness)
Influence: sudden and unpredictable occurrence, resulting in scrapped tool holder material or defective workpiece and scrapped. Cause: The processing parameters are set incorrectly, and the vibration tool workpiece or blade is not installed in place.
Measures: Set reasonable processing parameters, reduce the feed amount and reduce the chips to select the corresponding processing inserts.
Strengthen the rigidity of workpiece and blade.
3. Built-up edge
Influence: The size of the protruding workpiece is inconsistent, the surface finish is poor, and the surface of the workpiece is attached with fluff or burrs. Reason: The cutting speed is too low, the feed is too low and the blade is not sharp enough.
Measures: Increase the cutting speed and use a sharper insert for the feed.
