News
-
Talk about HSS and Carbide drill bits
As the two most widely used drill bits of different materials, high-speed steel drill bits and carbide drill bits, what are their respective characteristics, what are their advantages and disadvantages, and which material is better in comparison. The reason why high-spee...Read more -
Tap is a tool for processing internal threads
Tap is a tool for processing internal threads. According to the shape, it can be divided into spiral taps and straight edge taps. According to the use environment, it can be divided into hand taps and machine taps. According to the specifications, it can be divided into ...Read more -
Milling cutter
Milling cutters are used in many scenarios in our production. Today, I will discuss the types, applications and advantages of milling cutters: According to the types, milling cutters can be divided into: flat-end milling cutter, rough milling, removal of a large amount of blank, small area horizo...Read more -
What are the requirements for stainless steel processing tools?
1. Select the geometric parameters of the tool When machining stainless steel, the geometry of the cutting part of the tool should generally be considered from the choice of rake angle and back angle. When selecting the rake angle, factors such as the flute profile, the presence or absence of cha...Read more -
How to improve the durability of tools through processing methods
1. Different milling methods. According to different processing conditions, in order to improve the durability and productivity of the tool, different milling methods can be selected, such as up-cut milling, down milling, symmetrical milling and asymmetrical milling. 2. When cutting and milling s...Read more -
9 Reasons why HSS Taps BREAK
1. The quality of the tap is not good: Main materials, tool design, heat treatment conditions, machining accuracy, coating quality, etc. For example, the size difference at the transition of the tap section is too large or the transition fillet is not designed to cause stress concentration, and ...Read more -
How to choose the coating type of the CNC Tools?
Coated carbide tools have the following advantages: (1) The coating material of the surface layer has extremely high hardness and wear resistance. Compared with the uncoated cemented carbide, the coated cemented carbide allows the use of higher cutting speeds, thereby improving the processing eff...Read more -
The composition of alloy tool materials
Alloy tool materials are made of carbide (called hard phase) and metal (called binder phase) with high hardness and melting point through powder metallurgy. Wherein the alloy carbide tool materials commonly used have WC, TiC, TaC, NbC, etc., commonly used binders are Co, titanium carbide-based bi...Read more -
Cemented carbide milling cutters are mainly made of cemented carbide round bars
Cemented carbide milling cutters are mainly made of cemented carbide round bars, which are mainly used in CNC tool grinders as processing equipment, and gold steel grinding wheels as processing tools. MSK Tools introduces cemented carbide milling cutters that are made by computer or G code modifi...Read more -
The selection process of milling cutters generally consider the following aspects to choose
1,The selection process of milling cutters generally consider the following aspects to choose: (1) Part shape (considering the processing profile): The processing profile can generally be flat, deep, cavity, thread, etc. The tools used for different processing profiles are different. For example,...Read more -
Causes of common problems and recommended solutions
Problems Causes of common problems and recommended solutions Vibration occurs during cuttingMotion and ripple (1) Check whether the rigidity of the system is sufficient, whether the workpiece and tool bar extend too long, whether the spindle bearing is properly adjusted, whether the blade is...Read more -
Precautions for thread milling
In most cases, select the mid-range value at the beginning of use. For materials with higher hardness, reduce the cutting speed. When the overhang of the tool bar for deep hole machining is large, please reduce the cutting speed and feed rate to 20%-40% of the original (taken from the workpiece m...Read more
