News
-
Carbide Rough End Mill
CNC Cutter Milling Roughing End Mill have scallops on the outside diameter which causes the metal chips to break into smaller segments. This results in lower cutting pressures at a a given radial depth of cut. Features: 1. The cutting resistance of the tool is greatly reduced, the spindle is le...Read more -
Ball Nose End Mill
Ball nose end mill is a complex shape tool, it is an important tool for milling free-form surfaces. The cutting edge is a space-complex curve. Advantages of using ball nose end mill: A more stable processing state can be obtained: When using a ball-end knife for processing, the cutting angle is c...Read more -
What’s Reamer
The reamer is a rotary tool with one or more teeth to cut the thin layer of metal on the surface of the machined hole. The reamer has a rotary finishing tool with a straight edge or a spiral edge for reaming or trimming. Reamers usually require higher machining accuracy than drills due to less c...Read more -
Screw Thread Tap
The Screw Thread Tap is used to process the special internal thread of the wire threaded installation hole, also called the wire threaded Screw Thread Tap, ST tap. It can be used by machine or by hand. Screw Thread Taps can be divided into light alloy machines, hand taps, ordinary steel machines,...Read more -
How to choose a machine tap
1. Choose according to the tap tolerance zone The domestic machine taps are marked with the code of the tolerance zone of the pitch diameter: H1, H2, and H3 respectively indicate the different positions of the tolerance zone, but the tolerance value is the same. The tolerance zone code of hand ta...Read more -
Carbide Inner Cooling Twist Drill
Carbide Inner Cooling Twist Drill is a kind of hole processing tool. Its characteristics are from the shank to the cutting edge. There are two spiral holes that rotate according to the twist drill lead. During the cutting process, compressed air, oil or cutting fluid penetrates to achieve The fun...Read more -
Flat End Mill
Flat end mill are the most commonly used milling cutters on CNC machine tools. There are cutters on the cylindrical surface and end surface of the end mills. They can cut at the same time or separately. Mainly used for plane milling, groove milling, step face milling and profile milling. Flat end...Read more -
Tip tap
Tip taps are also called spiral point taps. They are suitable for through holes and deep threads. They have high strength, long life, fast cutting speed, stable dimensions, and clear tooth patterns (especially fine teeth). Chips are discharged forward when machining threads. Its core size design ...Read more -
Straight flute taps
Straight flute taps use: generally used for thread processing of ordinary lathes, drilling machines and tapping machines, and the cutting speed is slow. In high-hardness processing materials, materials that are likely to cause tool wear, cutting powdered materials, and through-hole blind holes wi...Read more -
Spiral point taps
Spiral point taps are also called tip taps. They are suitable for through holes and deep threads. They have high strength, long life, fast cutting speed, stable dimensions, and clear teeth (especially fine teeth). They are a deformation of straight fluted taps. It was invented in 1923 by Ernst Re...Read more -
Extrusion tap
Extrusion tap is a new type of thread tool that uses the principle of metal plastic deformation to process internal threads. Extrusion taps are a chip-free machining process for internal threads. It is especially suitable for copper alloys and aluminum alloys with lower strength and better plasti...Read more -
T-slot End Mill
For high performance Chamfer Groove Milling Cutter with high feed rates and depths of cut. Also suitable for groove bottom machining in circular milling applications. Tangentially installed indexable inserts warrant optimum chip removal paired with high performance at all times. T-slot milling cu...Read more
