Manufactur standard Ball Nose End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK
Manufactur standard Ball Nose End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK Detail:
Raw Material: Use ZK40SF with 12% Co content and 0.6um grain size
Coating: AlTiSiN, with the hardness and thermal stability are up to 4000HV and 1200℃, respectively
Tolerance of End Mill Diameter:1 ＜ D≤6 -0.010 ～ -0.030;6 ＜ D≤10 -0.015 ～ -0.040;10 ＜ D≤20 -0.020 ～ -0.050
The spiral angle is 35 degrees, which has strong adaptability to the material and hardness of the processed materials. With high cost performance，It is widely used in mold and product processing.
Advantage:1.The cutting edge is sharp and flat,even if magnified 100 times, there is no defect.2.Spiral double-edged belt can remove all kinds of machining burrs effectively.3.The fine research treatment of the groove bottom makes it easy to remove chip smoothly and make the operation more stable.4.The back chipping design is adopted at the cutter end to reduce the possibility of tool receiving trace during side milling. 5.Select high-quality wear-resistant materials, with concentrated particle size distribution of 0.4-0.6 micron ultra-fine particles, with high-quality wear resistance, which can greatly improve the tools life.
Specification:
| Item NO. | Diameter D | Cutting Length | Shank Diameter | Overall Length | Flutes |
| MSKEM4FA001 | 3 | 8 | 3 | 50 | 4 |
| MSKEM4FA002 | 1 | 3 | 4 | 50 | 4 |
| MSKEM4FA003 | 1.5 | 4 | 4 | 50 | 4 |
| MSKEM4FA004 | 2 | 6 | 4 | 50 | 4 |
| MSKEM4FA005 | 2.5 | 7 | 4 | 50 | 4 |
| MSKEM4FA006 | 3 | 8 | 4 | 50 | 4 |
| MSKEM4FA007 | 4 | 10 | 4 | 50 | 4 |
| MSKEM4FA008 | 5 | 13 | 5 | 50 | 4 |
| MSKEM4FA009 | 5 | 13 | 6 | 50 | 4 |
| MSKEM4FA010 | 6 | 15 | 6 | 50 | 4 |
| MSKEM4FA011 | 7 | 18 | 8 | 60 | 4 |
| MSKEM4FA012 | 8 | 20 | 8 | 60 | 4 |
| MSKEM4FA013 | 10 | 25 | 10 | 75 | 4 |
| MSKEM4FA014 | 12 | 30 | 12 | 75 | 4 |
| MSKEM4FA015 | 14 | 35 | 14 | 80 | 4 |
| MSKEM4FA016 | 14 | 45 | 14 | 100 | 4 |
| MSKEM4FA017 | 16 | 45 | 16 | 100 | 4 |
| MSKEM4FA018 | 18 | 45 | 18 | 100 | 4 |
| MSKEM4FA019 | 20 | 45 | 20 | 100 | 4 |
| Workpiece Material
|
||||||
| Carbon Steel | Alloy Steel | Cast Iron | Aluminium Alloy | Copper Alloy | Stainless Steel | Hardened Steel |
| Suitable | Suitable | Suitable | Suitable | Suitable | ||
Product detail pictures:
Related Product Guide:
We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for Manufactur standard Ball Nose End Mill - HRC60 Carbide 4 Flutes Standard Length End Mills – MSK , The product will supply to all over the world, such as: Leicester, United States, Lithuania, Our product quality is one of the major concerns and has been produced to meet the customer's standards. "Customer services and relationship" is another important area which we understand good communication and relationships with our customers is the most significant power to run it as a long term business.
By Antonia from Slovakia - 2017.05.02 11:33
The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
By Jonathan from Malaysia - 2017.01.28 19:59
