HRC45 IV tibia anguli radii milling cutter
This item is perfectum est aluminium, etiam idoneam ad aeris, aes et alia non-ferrea metalla.
| Numerus tibia | 4 | Materia | Carbon Steel; Alloy ferro; mittite ferrum |
| Sarcina | Lobortis | Tible diameter D (mm) | 3-20 |
| Notus | MSK | Genus | plana caput type |
| Shank Diameter (mm) | 3-20 | Tenet (ℓ) (mm) | 8-60 |
Feature:
I. coating: Altin Aluminium contentus praebet optimum calidum duritia et oxidatio resistentia.
II. High quality rudis materia, princeps duritia, bonum gerunt resistentia et corrosio resistentia.
III. CAECIO partem consilio; anguli radii, commutationes ad crepuit, late in altum celeritate secare.
IV. XXXV deg Helium angulus, princeps adaptability ad materiam et duritiam workpieces, late ad fingunt et productum processus et sumptus efficient.
| Tible diameter D (mm) | Tenet L1 (mm) | Diametro Shank D (mm) | Totalis Longitudo L (mm) |
| 3 | 9 | 3 | 50 |
| 3 | 12 | 3 | 75 |
| 3 | 15 | 3 | C |
| 1 | 3 | 4 | 50 |
| 1.5 | 5 | 4 | 50 |
| 2 | 6 | 4 | 50 |
| 2.5 | 8 | 4 | 50 |
| 3 | 9 | 4 | 50 |
| 3.5 | 12 | 4 | 50 |
| 4 | 12 | 4 | 50 |
| 4 | 20 | 4 | 75 |
| 4 | 25 | 4 | C |
| 5 | 15 | 5 | 50 |
| 5 | 20 | 5 | 75 |
| 5 | 25 | 6 | C |
| 2 | 6 | 6 | 50 |
| 3 | 9 | 6 | 50 |
| 4 | 12 | 6 | 50 |
| 5 | 15 | 6 | 50 |
| 6 | 18 | 6 | 50 |
| 6 | 30 | 6 | 75 |
| 6 | 30 | 6 | C |
| 6 | 40 | 6 | CL |
| 7 | 21 | 8 | 60 |
| 8 | 24 | 8 | 60 |
| 8 | 35 | 8 | 75 |
| 8 | 40 | 8 | C |
| 8 | 50 | 8 | CL |
| 9 | 27 | 10 | 75 |
| 10 | 30 | 10 | 75 |
| 10 | 40 | 10 | C |
| 10 | 50 | 10 | CL |
| 11 | 33 | 12 | 75 |
| 12 | 36 | 12 | 75 |
| 12 | 45 | 12 | C |
| 12 | 60 | 12 | CL |
| 14 | 35 | 14 | 80 |
| 14 | 45 | 14 | C |
| 14 | 65 | 14 | CL |
| 16 | 45 | 16 | C |
| 16 | 65 | 16 | CL |
| 18 | 45 | 18 | C |
| 18 | 70 | 18 | CL |
| 20 | 45 | 20 | C |
| 20 | 70 | 20 | CL |
Usus:
Late in multis agris
Aviation vestibulum
Apparatus productio
Currus manufacturer
CIRCUMSPECTO
Electrica vestibulum
Lathe Processing
