Onye nrụpụta VChamfer 3D Woodworking Slotting Cutter 60 Degree


  • Ihe:Tungsten
  • Ụdị:MSK
  • Dayameta agụba:16 mm
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    Tungsten ígwè nrụpụta, ogologo ndụ ọrụ, nkwado nhazi

     

    Ọ dịghị burrs, ezigbo mgbawa mgbapụ, nkọ mma ihu, eyi iguzogide na anwụ ngwa ngwa

    Nkwụsi ike ihe owuwu usoro tozuru oke / mara mma ma dịgidere

     

    A pụrụ ịdabere na àgwà a na-agbanwe agbanwe

     

    Ogologo ndụ, ịdịte aka dị elu / ọnụ ahịa bara uru

     

    Ọrụ zuru oke, ọrụ chiri anya

     

    Ihe onwunwe Tungsten ígwè

     

    Ịcha na ịkpụ osisi, MDF, wdg

     

    Oke ngwa: ụlọ ọrụ ụgbọ ala, ikuku ikuku, ụlọ ọrụ ebu, ụlọ ọrụ IT

    Zuru ezu spec

     

    1On-chọrọ customization / ọzọ off-the-shelf / a pụrụ ịdabere na àgwà

     

    2Maka mma ihe German tungsten ígwè siri ike / mma anọ nkọ

     

    3 Dị nro na-enweghị burrs

    Elu dị nro ma na-egbuke egbuke, ọnụ ọgụgụ nke ibe dị ukwuu, na akara ahụ dị ngwa ngwa

    4. Yiri nguzogide na elu corrosion eguzogide

    Enweghị nchara na oxidation na-eguzogide na gburugburu iru mmiri

     

     

    Otu esi eji igwe ihe osise osisi:

    1. Multi-stripe-egwe ọka cutters na-atụ aro maka ike ike machining nke particleboard, wdg.

    2. A na-atụ aro mma na-ese diamond maka ihe osise acrylic.

    3. Mmetụta eji eme ihe nke onye na-egbutu ala, elu elu nke ngwaahịa a na-emepụta enweghị ihe ọkpụkpụ, ọ dịghịkwa rocker n'oge nhazi.

    4. N'ihi na multi-layer osisi na splint nhazi, ọ na-atụ aro na-eji okpukpu abụọ ihu ogologo groove milling cutter.

    5. Maka osisi njupụta dị elu na osisi siri ike, a na-atụ aro ka ị jiri eriri ribbed.

    6. Maka n'elu na ala burr-free ịkpụ, a na-atụ aro ka ị jiri otu ọnụ ọnụ, okpukpu abụọ na elu na-egwe ọka.

    7. N'ihi na okwuchi, MDF, na-amaghị nwoke osisi, PVC, acrylic nnukwu-ọnụ ọgụgụ miri enyemaka nhazi, a na-atụ aro ka iji otu onu helical bọl ọgwụgwụ egwe ọka cutter.

    8. Maka nhazi nkenke obere enyemaka enyemaka, a na-atụ aro ka ị jiri onye na-egbutu gburugburu.

    9. Maka ịkpụ efere aluminom, a na-atụ aro ka ị jiri otu akụkụ pụrụ iche na-egwe nri aluminom. Enweghị ịrapagidesi ike na mma n'oge nhazi, oke ọsọ na arụmọrụ dị elu.

    10. Maka ịkpụ MDF, a na-atụ aro ka ị jiri onye na-egbu osisi helical nwere ihu abụọ nwere nnukwu mgbawa. Ọ nwere oghere mgbawa mgbawa abụọ nwere ikike dị elu na imewe ihu abụọ, nke ọ bụghị naanị na-arụ ọrụ iwepụ mgbawa dị mma, kamakwa na-enweta nguzozi ngwa ngwa dị mma. Mgbe ị na-arụ ọrụ ọkara na mbadamba njupụta dị elu, ọ nwere njirimara nke enweghị blackening, enweghị okpu anwụrụ ọkụ, na ogologo ndụ ọrụ.

    11. Maka ịkpụ acrylic, a na-atụ aro ka iji otu onye na-eme ihe na-eme ka ọ bụrụ ihe na-eme ka ọkpụkpụ na-egbuke egbuke na-egbuke egbuke, nke a na-eji na-enweghị anwụrụ ọkụ na-esi ísì ụtọ, ngwa ngwa ngwa ngwa, arụmọrụ dị elu, enweghị mpempe akwụkwọ na-egbuke egbuke, na ezigbo enyi na gburugburu ebe obibi. Usoro mmepụta ya pụrụ iche na-eme ka a mata na acrylic agaghị agbawa. , Ezigbo mma mma ụkpụrụ (ọbụlagodi na-enweghị mma ụkpụrụ), elu bụ ezigbo na-eji ire ụtọ. N'elu igwe a na-arụ ọrụ kwesịrị iji nweta mmetụta oyi, a na-atụ aro ka ị jiri ihe na-egwe ọka spiral nke nwere ihu abụọ nwere ihu abụọ.

     

    O1CN01Zu8jtt2N9PelAFMRL_!!2206929699920-0-cib

    11


  • Nke gara aga:
  • Osote:

  • Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya

    Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya