Na-ere ọkụ na-ehicha ala rawụta Bit Na Lathe


  • Akara:MSK
  • MOQ: 5
  • Ihe:Tungsten ígwè
  • Nkọwa ngwaahịa

    Mkpado ngwaahịa

    1
    4
    9

    Nkọwapụta ngwaahịa

    Na-ehicha ihe rawụta ala nke tungsten steel, nwere ike siri ike, oke ike na-eyi, ike dị elu, iguzogide ekwe, mgbochi mgbawa, wdg.

    Atụmatụ

    1.Tungsten ígwè cutter ahu bụ nkọ na eyi na-eguzogide ruo ogologo oge

    2.High ịgbado ọkụ bụ ike na inogide

    A na-anabata usoro ịgbado ọkụ ugboro ugboro n'etiti onye na-egbutu isi na aka, na interface ahụ juputara ma kwụsie ike.

    3.Adabara ihe: plywood, hardwood, particleboard, MDF

    4.Use mmetụta: plywood osise, hardwood osise, urughuru osisi osise, MDF osise

    5.Tungsten ígwè agụba ígwè aka

    A na-eji ihe nchara tungsten siri ike mee agụba ahụ, na ihe niile siri ike, siri ike ma dịgidere, ma nwee ogologo ndụ ọrụ.

     

    Otu esi eji igwe ihe osise osisi:

    1. Multi-stripe-egwe ọka cutters na-atụ aro maka ike ike machining nke particleboard, wdg.

    2. A na-atụ aro mma na-ese diamond maka ihe osise acrylic.

    3. Mmetụta eji eme ihe nke onye na-egbutu ala, elu elu nke ngwaahịa a na-emepụta enweghị ihe ọkpụkpụ, ọ dịghịkwa rocker n'oge nhazi.

    4. N'ihi na multi-layer osisi na splint nhazi, ọ na-atụ aro na-eji okpukpu abụọ ihu ogologo groove milling cutter.

    5. Maka osisi njupụta dị elu na osisi siri ike, a na-atụ aro ka ị jiri eriri ribbed.

    6. Maka n'elu na ala burr-free ịkpụ, a na-atụ aro ka ị jiri otu ọnụ ọnụ, okpukpu abụọ na elu na-egwe ọka.

    7. N'ihi na okwuchi, MDF, na-amaghị nwoke osisi, PVC, acrylic nnukwu-ọnụ ọgụgụ miri enyemaka nhazi, a na-atụ aro ka iji otu onu helical bọl ọgwụgwụ egwe ọka cutter.

    8. Maka nhazi nkenke obere enyemaka enyemaka, a na-atụ aro ka ị jiri onye na-egbutu gburugburu.

    9. Maka ịkpụ efere aluminom, a na-atụ aro ka ị jiri otu akụkụ pụrụ iche na-egwe nri aluminom.Enweghị ịrapagidesi ike na mma n'oge nhazi, oke ọsọ na arụmọrụ dị elu.

    10. Maka ịkpụ MDF, a na-atụ aro ka ị jiri onye na-egbu osisi helical nwere ihu abụọ nwere nnukwu mwepụ mgbawa.Ọ nwere oghere mgbawa mgbawa abụọ nwere ikike dị elu na imewe ihu abụọ, nke ọ bụghị naanị na-arụ ọrụ iwepụ mgbawa dị mma, kamakwa na-enweta nguzozi ngwa ngwa dị mma.Mgbe ị na-edozi bọọdụ dị elu na njupụta dị elu, ọ nwere njirimara nke enweghị blackening, enweghị anwụrụ anwụrụ ọkụ, na ogologo ndụ ọrụ.

    11. Maka ịkpụ acrylic, a na-atụ aro ka iji otu onye na-eme ihe na-eme ka ọ bụrụ ihe na-eme ka ọkpụkpụ na-egbuke egbuke na-egbuke egbuke, nke a na-eji na-enweghị anwụrụ ọkụ na-esi ísì ụtọ, ngwa ngwa ngwa ngwa, arụmọrụ dị elu, enweghị mpempe akwụkwọ na-egbuke egbuke, na ezigbo enyi na gburugburu ebe obibi.Usoro mmepụta ya pụrụ iche na-eme ka a mata na acrylic agaghị agbawa., Ezigbo mma mma ụkpụrụ (ọbụlagodi na-enweghị mma ụkpụrụ), elu bụ ezigbo na-eji ire ụtọ.Elu igwe a na-eme ka ọ dị mkpa iji nweta mmetụta oyi, a na-atụkwa aro ka ị jiri ihe na-egwe ọka spiral nke nwere ihu abụọ nwere ihu abụọ.

    ụlọ akụ foto-31
    ụlọ akụ foto-21

  • Nke gara aga:
  • Osote:

  • Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya

    Zitere anyị ozi gị:

    Dee ozi gị ebe a ziga anyị ya