HRC55 carbide spot drill for Aluminium
Feature:
- Products in stock are uncoated, various coatings available according to your needs.
- Excellent wear resistance and long using life
- Spotting drills can perform both centering and chamfering. Precise position the holes and chamfer are accomplished at one time to improve the processing efficiency.
- Workpiece material: Suitable for general steels, alloy steels, tempered steels, casr iron and aluminium alloy, etc.
Notice:
- Fixed-point drilling can only be used for fixed-pointing, dotting, and chamfering, and must not be used for drilling
- Be sure to test the yaw of the tool before use, please select correction when it exceeds 0.01mm
- Fixed-point drilling is formed by one-time processing of fixed-point + chamfering. If you want to process a 5mm hole, you generally choose a 6mm fixed-point drill, so that subsequent drilling will not be deflected, and a 0.5mm chamfer can be obtained.
| Workpiece Material | Aluminium | Material | Tungsten |
| Angle | 90 degree | Flute | 2 |
| Coating | No | Brand | MSK |
| Diameter (mm) |
Flute | Total Length(mm) | Angle | Shank Diameter(mm) | |||||
|
3 |
2 |
50 |
90 |
3 |
|||||
|
4 |
2 |
50 |
90 |
4 |
|||||
|
5 |
2 |
50 |
90 |
5 |
|||||
|
6 |
2 |
50 |
90 |
6 |
|||||
|
8 |
2 |
60 |
90 |
8 |
|||||
|
10 |
2 |
75 |
90 |
10 |
|||||
|
12 |
2 |
75 |
90 |
12 |
|||||
Use:
Widely used in many fields
Aviation Manufacturing
Machine Production
Car manufacturer
Mold making
Electrical Manufacturing
Lathe processing
Send your message to us:
Write your message here and send it to us
