High Performance CNC Parting And Grooving Insert For Aluminum
PRODUCT DESCRIPTION
G Type
The special chip breaker with two bosses design narrows the groove shape,
makes it easier to discharge iron chips, and is not easy to scratch the groove surface,
which is biased towards finishing workpieces and has a sharp edge
M Type
The same special chipbreaker design, with deformation cutting effect,
strong versatility, widely used in fine and rough machining
V Type
The cutting edge is sharp and the cutting is light and light, mainly used for stainless steel,
low carbon steel grooving and cutting, and the surface finish is high.
V-R type
It is mainly used for cutting stainless steel and low carbon steel.
Since the blade is beveled, the tail of the section can be removed after cutting.
It has good advantages in processing stainless steel pipe fittings, and it can deburr the section.
FEATURES
1. Smooth cutting
After the chip breaker is deformed by the iron chips, it is not easy to get stuck, and the cutting is smooth
2. Good finish
The iron filings do not rub against the groove wall, and the finish is naturally improved
3. Not easy to stick to the tool
Less sticking to the blade, thus increasing tool life
4. Special materials
Different blades correspond to different processing materials, which can highlight the value of the blade and achieve more with less effort
| Brand | MSK | Applicable | Lathe |
| Product Name | Carbide Inserts | Model | MGGN |
| Material | Carbide | Type | Turning Tool |
ADVANTAGE
1. Reduce the friction between the chip and the workpiece to be processed, improve the finish, and reduce the rough surface
2. Better chip flow, operator can choose to increase feed rate due to reduced cutting load
