Labarai

  • Na'urar Tafiyar Zare

    A matsayin kayan aiki na yau da kullun don sarrafa zaren ciki, ana iya raba famfo zuwa famfo mai karkace, famfo mai karkata zuwa gefe, famfo madaidaicin tsagi da famfo zaren bututu bisa ga sifofinsu, kuma ana iya raba su zuwa famfo na hannu da famfo na inji gwargwadon yanayin amfani. ...
    Kara karantawa
  • Binciken Matsala Ta Karyewa

    Binciken Matsala Ta Karyewa

    1. Diamita na rami na ƙasa ya yi ƙanƙanta da yawa Misali, lokacin sarrafa zaren M5 × 0.5 na kayan ƙarfe na ƙarfe, ya kamata a yi amfani da diamita na diamita na 4.5mm don yin rami na ƙasa tare da yankan famfo.Idan aka yi amfani da ɗigon ɗigon 4.2mm don yin rami na ƙasa, pa...
    Kara karantawa
  • Binciken matsala da ma'auni na famfo

    Binciken matsala da ma'auni na famfo

    1. Tsarin famfo ba shi da kyau Main kayan, CNC kayan aiki zane, zafi magani, machining daidaito, shafi ingancin, da dai sauransu Alal misali, da girman bambanci a miƙa mulki na famfo giciye-section ne ma babba ko mika mulki fillet ba. an tsara shi don haifar da damuwa co...
    Kara karantawa
  • Nasihun Tsaro don Amfani da Kayan Aikin Wuta

    Nasihun Tsaro don Amfani da Kayan Aikin Wuta

    1. Saya kayan aiki masu kyau.2. Duba kayan aiki akai-akai don tabbatar da cewa suna cikin yanayi mai kyau kuma sun dace da amfani.3. Tabbatar kula da kayan aikin ku ta hanyar yin gyare-gyare akai-akai, kamar niƙa ko gogewa.4. Sanya kayan kariya masu dacewa kamar lea ...
    Kara karantawa
  • Shirye-shirye da kariya don amfani da na'urar yankan Laser

    Shirye-shirye da kariya don amfani da na'urar yankan Laser

    Shiri kafin amfani da na'urar yankan Laser 1. Bincika ko ƙarfin wutar lantarki ya yi daidai da ƙimar ƙarfin injin kafin amfani da shi, don guje wa lalacewar da ba dole ba.2. Duba ko akwai ragowar al'amuran waje akan teburin na'ura, don haka kamar yadda n ...
    Kara karantawa
  • Daidaita amfani da raƙuman tasirin tasiri

    Daidaita amfani da raƙuman tasirin tasiri

    (1) Kafin aiki, tabbatar da bincika ko samar da wutar lantarki ya yi daidai da ƙimar ƙarfin lantarki na 220V da aka amince da kayan aikin wutar lantarki, don guje wa haɗa wutar lantarki ta 380V ta kuskure.(2) Kafin amfani da rawar motsa jiki, da fatan za a duba a hankali kariyar kariya ...
    Kara karantawa
  • Amfanin tungsten karfe rawar soja rago don hako bakin karfe workpieces.

    Amfanin tungsten karfe rawar soja rago don hako bakin karfe workpieces.

    1. Kyakkyawan juriya mai kyau, tungsten karfe, a matsayin rawar soja na biyu kawai zuwa PCD, yana da juriya mai girma kuma yana da matukar dacewa don sarrafa kayan aiki na karfe / bakin karfe 2. Babban juriya na zafin jiki, yana da sauƙi don samar da babban zafin jiki lokacin da hakowa a cikin CNC machining center ko wani hakowa m ...
    Kara karantawa
  • Ma'anar, fa'idodi da manyan amfani da maƙallan maɓalli

    Ma'anar, fa'idodi da manyan amfani da maƙallan maɓalli

    Ƙaƙaƙƙen famfo kuma ana san su da bututun tukwici da taffun baki a cikin masana'antar kera.Mafi mahimmancin fasalin tsarin matsi-matsa shine madaidaicin madaidaicin-taper-dimbin nau'in dunƙule-point a ƙarshen gaba, wanda ke murƙushe yanke yayin yankan da ...
    Kara karantawa
  • Yadda za a zabi rawar hannu?

    Yadda za a zabi rawar hannu?

    Sojin hannu na lantarki shi ne mafi kankantar wutar lantarki a cikin dukkan na’urorin lantarki, kuma ana iya cewa ya fi karfin biyan bukatun yau da kullum na iyali.Gabaɗaya ƙaramin girmansa ne, ya mamaye ƙaramin yanki, kuma ya dace sosai don ajiya da amfani....
    Kara karantawa
  • Yadda za a zabi rawar soja?

    Yadda za a zabi rawar soja?

    A yau, zan raba yadda za a zabar rawar motsa jiki ta hanyar yanayi guda uku na kayan aikin motsa jiki, wanda shine: abu, sutura da halayen geometric.1 Yadda za a zabi kayan aikin rawar sojan kayan aikin za a iya raba kusan kashi uku: ƙarfe mai sauri, cobal ...
    Kara karantawa
  • Fa'idodi da rashin amfanin mai yankan niƙa guda ɗaya da mai yankan niƙa biyu

    Fa'idodi da rashin amfanin mai yankan niƙa guda ɗaya da mai yankan niƙa biyu

    Mai yankan mirgine mai kaifi guda ɗaya yana iya yankewa kuma yana da kyakkyawan aikin yankan, don haka yana iya yankewa a babban saurin sauri da abinci mai sauri, kuma ingancin bayyanar yana da kyau!Za a iya daidaita diamita da jujjuya taper na reamer-blade reamer bisa ga yanke sit ...
    Kara karantawa
  • Kariya don amfani da ƙwanƙwasa HSS

    Kariya don amfani da ƙwanƙwasa HSS

    1. Kafin amfani, duba ko abubuwan da ke cikin na'urar hakowa na al'ada ne;2. Dole ne a danne ƙwanƙarar rawar ƙarfe mai sauri da kayan aiki, kuma kayan aikin ba za a iya riƙe su da hannu ba don guje wa haɗarin rauni da lalacewar kayan aiki ta hanyar rotati ...
    Kara karantawa

Aiko mana da sakon ku:

Ku rubuta sakonku anan ku aiko mana