ANSI # 00 # 1 # 2 # 3 # 4 # 5 # 6 1/8 "Cibiyar Drill
FALALAR
1. Yin amfani da W6Mo5Cr4V21 mai inganci, bayan tsananin zafi mai zafi, ƙarancin ƙarancin ƙarfi yana da kwanciyar hankali, ƙaƙƙarfan ƙarfi yana da kyau, juriya na lalacewa yana da ƙarfi, juriya na lalata yana da ƙarfi, kuma rayuwar sabis yana da tsayi.
2. An karɓi dukkan tsarin niƙa, an kafa siffar gaba ɗaya, kuma girman ya kasance barga. Babban daidaito da aikin barga. Kyakkyawan gamawa mai kyau, kyakkyawa kuma mai amfani.
3. Taurin maganin zafi har zuwa HRC45 HRC, ƙarfin haƙori mai ƙarfi, yankan kaifi da ingantaccen sarrafawa.
4. An saita cibiyar hakowa daidai, juriya na lalacewa yana da kyau, kuma ba shi da sauƙin karya.
UMARNI
1. Nau'in rawar tsakiya shine kayan aikin yankewa kuma ana amfani dashi galibi don hakowa karfe. Dole ne mai amfani ya zaɓi nau'in rawar tsakiya a hankali bisa ga nau'in rami da girman mai mulki na sassan da za a sarrafa.
2. A-type rawar soja yana da taurin digiri 65 kuma za'a iya amfani dashi don maganin zafi na karfe na abrasive tare da taurin digiri 40, da bakin karfe don hakowa.
3. Kafin a sake yin amfani da kayan aiki, dole ne a wanke man shafawa na anti-tsatsa don hana kwakwalwan kwamfuta daga mannewa ga yankewa kuma ya shafi aikin yankewa.
4. Lokacin yin aiki tare da ƙwanƙwasa na hannu, rawar tsakiya ya kamata ya cimma daidaiton matsayi da ake bukata
5. Fuskar kayan aikin da za a sarrafa ya kamata ya zama madaidaiciya, kuma kada a sami ramukan yashi ko wurare masu wuya don kauce wa lalacewar kayan aiki.
6. Yanke ruwa: Zabi ruwan yanka daban-daban bisa ga abin da ake sarrafawa, kuma sanyaya yakamata ya wadatar
7. Abubuwan da ke buƙatar kulawa: Idan akwai wani yanayi mara kyau yayin sarrafa shi, ya kamata a dakatar da shi nan da nan, kuma za a iya gano dalilin kafin sarrafa shi. Kula da lalacewa na yanke yanke kuma gyara shi a cikin lokaci; bayan amfani da kayan aiki, tsaftace man a saman kuma kiyaye shi da kyau.
| Alamar | MSK | MOQ | 10 |
| Sunan samfur | Rikicin tsakiya | Shiryawa | Akwatin Filastik |
| Kayan abu | Farashin HSSM2 | Amfani | Copper, aluminum gami |
| Diamita | Drill Dia d | Jiki Dia d1 | Tsawon Drill L1 | Jimlar tsayi L |
| #00 | 0.025 ″ | 1/8 | 0.030 | 1-1/8 |
| #0 | 1/32 | 1/8 | 0.038 | 1-1/8 |
| #1 | 3/64 | 1/8 | 3/64 | 1-1/4 |
| #2 | 5/64 | 3/16 | 5/64 | 1-7/8 |
| #3 | 7/64 | 1/4 | 7/64 | 2 |
| #4 | 1/8 | 5/16 | 1/8 | 2-1/8 |
| #5 | 3/16 | 7/16 | 3/16 | 2-3/4 |
| #6 | 7/32 | 1/2 | 7/32 | 3 |
| #7 | 1/4 | 5/8 | 1/4 | 3-1/4 |
| #8 | 5/16 | 3/4 | 5/16 | 3-1/2 |
