Nau'in Carbide T-milling abun yanka Madaidaicin shank T-type milling abun yanka
Fasaha:
Knife-baki madubi nika tsari
Yi amfani da kayan aiki masu kyau
Mai sauri kuma mai dorewa
Aikace-aikace
Don niƙa T-ramummuka a cikin tebura da gadaje na kayan aikin injin da makamantansu.
Dole ne a fara yanke ramin tsaye, ta yadda wuya da ƙugiya za su iya shiga cikin yanke.
| Kayan abu | Die karfe, jefa baƙin ƙarfe, carbon karfe, gami karfe, kayan aiki karfe, general baƙin ƙarfe |
| Alamar | MSK |
| Diamita sarewa D(mm) | 3-20 |
| Nau'in | Ƙarshen Mill |
| Diamita Shank (mm) | 1.5-10 |
| Tsawon kai (ℓ)(mm) | 6-25 |
| Takaddun shaida | ISO9001 |
| Kunshin | Akwatin |
Amfani:
1.An zaɓi sandunan ƙarfe na tungsten da aka shigo da su, tare da tauri mai ƙarfi da juriya, kaifi kuma ba sauƙin gajerun wuƙaƙe ba, da tsawon rayuwar sabis.
2.Knife gefuna zane, zane-zane mai zagaye, zaɓin kayan abu mai kyau, da kuma babban yankan zane yana inganta sassaucin sauƙi.
3. Kaifi ruwa. Ƙarƙashin ƙaƙƙarfan yana da kaifi, yana sa yankan ya zama santsi, kuma ƙirar anti-vibration na yankan zai iya inganta ingantaccen aiki da kwanciyar hankali.
4.Chamfer zane, ma'auni girman girman girman, 45 digiri chamfer, zagaye da santsi kwane-kwane, sa shi sauki shigar.
| Diamita sarewa (mm) | Kauri (mm) | Diamita na kai (mm) | Tsawon kai (mm) | Tsawon (mm) | sarewa |
| 3 | 1/1.5/2/2.5/3 | 1.5 | 6 | 50 | 4 |
| 4 | 1/1.5/2/2.5/3 | 2 | 6 | 50 | 4 |
| 5 | 1/1.5/2/2.5/3 | 2.5 | 10 | 50 | 4 |
| 6 | 1/1.5/2/2.5/3 | 3 | 10 | 50 | 4 |
| 7 | 1/1.5/2/2.5/3 | 3.5 | 12 | 60 | 4 |
| 8 | 1/1.5/2/2.5/3 | 4 | 12 | 60 | 4 |
| 9 | 1/1.5/2/2.5/3 | 4.5 | 15 | 60 | 4 |
| 0 | 1/1.5/2/2.5/3 | 5 | 15 | 60 | 6 |
| 11 | 1/1.5/2/2.5/3 | 5.5 | 15 | 60 | 6 |
| 2 | 1/1.5/2/2.5/3 | 6 | 15 | 60 | 6 |
| 4 | 1/1.5/2/2.5/3 | 7 | 20 | 65 | 6 |
| 6 | 1/1.5/2/2.5/3 | 8 | 20 | 65 | 6 |
| 20 | 1/1.5/2/2.5/3 | 10 | 25 | 75 | 6 |
Amfani
Masana'antar Jiragen Sama
Samar da Injin
Mai kera mota
Yin gyare-gyare
Samar da Wutar Lantarki
sarrafa lathe
