Good Quality Cermet Inserts For Finishing Steel And Stainless
PRODUCT DESCRIPTION
At the front end of the tap (thread tap) is a drill bit, which is a high-efficiency tap (thread tap) for continuous drilling and tapping to complete processing at one time.
Features
1. Double-sided sharp,Hexagon available
Different R angles meet your fine and rough turning needs,Reduce cutting resistance and achieve sharp cutting
2. Different patterns
Complete specifications and various patterns for chip breaking and smooth chip removal
3.Import process
Sharp and wear-resistant,thicker coating.
More stable and wear-resistant processing
Special for ceramics, wear-resistant and durable, higher hardness.
| Brand | MSK | Type | Milling Tool |
| Product Name | Carbide Inserts |
Model | TNGG160402 |
| Material | Ceramics | Package | Plastic Box |
NOTICE
Analysis of common problems
1. Rake face wear: (this is the common practical form)
Effects: Gradual changes in workpiece dimensions or reduced surface finish.
Reason: The blade material is not suitable, and the cutting amount is too large.
Measures: Choose a harder material, reduce the amount of cutting, and reduce the cutting speed.
2. Crash problem: (bad form of effectiveness)
Effects: Sudden changes in workpiece size or surface finish, resulting in sparking surface burrs. ,
Reason: improper parameter setting, improper selection of blade material, poor rigidity of workpiece, unstable blade clamping. Action: Check the machining parameters, such as reducing the line speed and changing to a higher wear-resistant insert.
3. Severely broken: (very bad form of effectiveness)
Influence: sudden and unpredictable occurrence, resulting in scrapped tool holder material or defective workpiece and scrapped. Cause: The processing parameters are set incorrectly, and the vibration tool workpiece or blade is not installed in place.
Measures: Set reasonable machining parameters, reduce the feed rate and reduce the chips to select the corresponding machining inserts.
Strengthen the rigidity of workpiece and blade.
3. Built-up edge
Influence: The size of the protruding workpiece is inconsistent, the surface finish is poor, and the surface of the workpiece is attached with fluff or burrs. Reason: The cutting speed is too low, the feed is too low and the blade is not sharp enough.
Measures: Increase the cutting speed and use a sharper insert for the feed.
